Product Description
1L Plastic Pet Water Bottle Blow Molding Stretch Making Machine
PM-8Y semiautomatic bottle blow molding machine is suitable for producing PET plastic containers and bottles from 100-2000ml. It is widely used to produce the carbonated bottle ,mineral water,carbonated drink bottle, pesticide bottle oil bottle cosmetics,wide-mouth bottle etc.
· Adopting double crank to adjust mould ,heavy locking mould, stable and fast ,Adopt infrared oven to heat the perform ,the perform rotated and heated equally.
· The air system has been divided into two parts: pneumatic action part and bottle blow part to meet the different requirements for the action and blow .It can provide sufficient and steady high pressure for blowing large irregular shaped bottles.
· The machine is also equipped with muffler and oiling system to lubricate the mechanical part of the machine.
· The machine can be operated in the step-by-step mode and the semi-auto mode.
· The machine is small with low investment, easy and safe to operate.
Technical specifications:
1. Capacity:1200-1500pcs/hr
2. volume of product: 100ml~2000ml
3.Application:Water bottle, medicine bottle ,oil bottle..
4.Work stuff: 2~3workers
5.Power consumption: 36kw
Equipment list:
| NO. |
NAME |
MODEL |
QTY |
| 1 |
Semi-automatic PET bottle blow molding machine |
PM-8Y |
1set |
| 2 |
Blowing mold |
100ml-2L |
1set |
| 3 |
HP Air Compressor |
1.2m3/min 30Kg |
1set |
| 4 |
Air dryer |
2.0 m3/min 30Kg |
1set |
| 5 |
Air filter |
2.0m3/min 30kg |
2sets |
| 6 |
Water chiller |
3HP |
1pc |
*Spare parts List :
Seal cushion(10pcs);Lamps(5pcs);Fuse(3pcs);Switch(1pcs);breaker(1pcs);Silicon controlled (1pcs)
pressure adjust (1pc)
Technical Parameter of blow molding machine:
| Main parameter: |
| Model |
PM-8Y |
| Container |
Product material |
PET |
| Volume |
0.1L-2L |
| Theoretical output |
1200-1600PCS/H |
| Preform length |
15mm-350mm |
| Preform inner diameter |
φ5mm-38mm |
| Moulding |
Max.mould plate Dimenstion(L x W) |
350x380mm |
| Max.mould thickness |
180mm |
| Clamping force |
45KN |
| Mould opening stroke |
160mm |
| Machine size and weight |
Main machine (L x W x H) |
160x60x161CM |
| Main machine weight |
500Kg |
| Heater (L x W x H) |
187x63x145CM |
| Heater weight |
250Kg |
| Power |
17.5kw |
HP air compressor:
| Air compressor |
Unit |
1.2M3/min 30KG |
| Volume |
M3 |
1.2 |
| Pressure |
Kg |
30 |
| Speed |
r/min |
850 |
| Power |
KW |
15 |
| Overall Dimension |
mm |
2000*1100*1600 |
| Weight |
kg |
620 |
Air Filter:
| Refining-Filter |
Unit |
1.0M3/30Kg |
| Flow Capacity |
M3/Min |
1 |
| Max. work pressure |
Mpa |
3.0 |
| Inlet Temp. |
ºC |
≤50 |
| Cold Medium |
mm |
650*250*250 |
| Weight |
Kg |
15 |
Air dryer:
| Refrigeration Air Dryer |
Unit |
2.0M3/min 3.0Mpa |
| Flow capacity |
Nm3/min |
2.0 |
| W.P |
Mpa |
3.0 |
| Inlet Temp. |
ºC |
≤80 |
| Dew point |
ºC |
23 |
| Ambient Temp. |
ºC |
≤38 |
| Power supply |
V/HZ |
220/50 |
| Compressor power |
Kw |
0.75 |
| Cold Medium |
mm |
1050×650×1100 |
| Weight |
Kg |
120 |
water chiller:
| Model |
03WCI |
| 4.4/38ºC Cooling capacity(Kcal/h) |
7188 |
| Compressor |
All-closed vorticity |
| Compressor power (KW) |
2.5 |
| Refrigerant |
R22 |
| Chilled water pump power(KW) |
0.75 |
| 10ºC Max. flow rate of chilled water(L/min) |
55 |
| Flow water inlet and outlet pipe |
1'' |
| Condensing water rate L/min |
≥36 |
| Chilled water inlet and outlet pipe |
1'' |
| Exterior dimension |
Length(mm) |
1000 |
| Width(mm) |
600 |
| Height(mm) |
1180 |
| Water tank capacity |
L |
50 |
| Weight |
Kg |
150 |
Audited Supplier 
Audited Supplier 
){kind=link}
){kind=link}