The washing machine for disinfection, filling, capping three feature lines. Is mainly used for liquid
Filling, it is characterized by moderate yield, simple structure, easy maintenance.
2,The main parameters:
Line the total length: 11.1 m
Power Supply :380V 50HZ
Power :4.5KW
Atmospheric pressure : 0.5 ~ 0.7mpa
Rinsing head: 4, filling head:4 capping head:1
Production:640 bottles / h
1,Usage:
3,Works procedure:
When the bottles straight from the chain of humanitarian sent to the first machine rinser; the machine in motion, in the Under the action of cam, so that folder open bottle clip and contraction of the bottle rotated 180 degrees for washing and disinfection. Continue to operate, the bottle returned to the original point of view. And the open clip, under the influence of the bottle in the Jog Dial to enter delivery systems. Then transported to the filling machine parts, filling machine parts has a photoelectric detection, when the bottle is only through the Ba, the optical data into information to the PLC, PLC had instructed the cylinder block to block bottles . Also, bottle filling machine rear cylinder block has also played, keep an empty bottle into the capping machine. Under the action of the program, filling the cylinder downward movement, so that within the filling valve into the bottle filling, until a certain time to stop filling, the cylinder block bottles back. Filled bottle into the capping machine, capping machine from the rack, the justifications for cover device, and even the composition of gland. Gland it is connected to the horizontal section of the dump under a certain angle, the constant movement when the bottle, put on caps. Then, the bottles with catchy article closely aligns with the gland, gland play a role.
4,Operation:
1, sterilization rinser
First of all, the water tank filled with water, to prevent pump damage. Then, turn the power switch:
1.1, start the host button and pump button.
1.2, Open the governor switch.
1.3, Slowly rotating speed controller,
the machine will operate normally.
1.4, Downtime we first governor re-zero,
and then cut off the power.
Machine size:1100×800×1800 mm
Weight:700kg
5 filling machine:
2.1:check steam source, water is turned on, and
maintain a certain degree of normal pressure.
2.2:Open the power switch, make button to set the
automatic position, filling machine under the control
of the program on the automatic operation.
Machine Size:1200×800×1800mm
Weight:700kg
6 capping machine:
Just press the Start button
Machine Size:800×600×1800mm
Weight:500kg
Audited Supplier 
Audited Supplier 
){kind=link}
){kind=link}