Automatic 5litre Jerry Can Water Filling Machine
|FOB Price:||US $12,000-45,000 / Piece|
|Min. Order:||1 Piece|
|Min. Order||FOB Price|
|1 Piece||US $12,000-45,000/ Piece|
|Transport Package:||Wooden Case|
|Payment Terms:||L/C, T/T, D/P, Western Union, Paypal, Money Gram|
- Type: Volumetric Filling Machine
- Material Type: Liquid
- Feed Cylinder Structure: Single-Room Feeding
- Filling Principle: Atmospheric Pressure
- Structure: Rotary
- Packaging Material: Plastic
- Certificate: Ce,ISO,SGS
- Processing Material: Water,Juice,Carbonated Drink,Oil,etc
- Bottle Volume: 200ml-2000ml 5L Water Filling Machine
- Capacity: 2000bph to 20000bph
- Trademark: Proman
- Origin: China
- Automatic Grade: Fully Automatic
- Filling Valve Head: Multi-Head
- Dosing Device: Plunger
- Packaging Container Lifting Structure: Pneumatic Lifting
- Packaging: Bottle
- Material: Ss304
- Composition: 5L Water Filling Machine
- Elctric: Siemens,Mitsubishi,etc
- Warranty: Two Years
- Exchange Parts: Free 5L Water Filling Machine
- Specification: 3.2m*1.8m*2.4m
- HS Code: 8422301090
The washing machine for disinfection, filling, capping three feature lines. Is mainly used for liquid
Filling, it is characterized by moderate yield, simple structure, easy maintenance.
2,The main parameters:
Line the total length: 11.1 m
Power Supply :380V 50HZ
Atmospheric pressure : 0.5 ~ 0.7mpa
Rinsing head: 4, filling head:4 capping head:1
Production:640 bottles / h
When the bottles straight from the chain of humanitarian sent to the first machine rinser; the machine in motion, in the Under the action of cam, so that folder open bottle clip and contraction of the bottle rotated 180 degrees for washing and disinfection. Continue to operate, the bottle returned to the original point of view. And the open clip, under the influence of the bottle in the Jog Dial to enter delivery systems. Then transported to the filling machine parts, filling machine parts has a photoelectric detection, when the bottle is only through the Ba, the optical data into information to the PLC, PLC had instructed the cylinder block to block bottles . Also, bottle filling machine rear cylinder block has also played, keep an empty bottle into the capping machine. Under the action of the program, filling the cylinder downward movement, so that within the filling valve into the bottle filling, until a certain time to stop filling, the cylinder block bottles back. Filled bottle into the capping machine, capping machine from the rack, the justifications for cover device, and even the composition of gland. Gland it is connected to the horizontal section of the dump under a certain angle, the constant movement when the bottle, put on caps. Then, the bottles with catchy article closely aligns with the gland, gland play a role.
1, sterilization rinser
First of all, the water tank filled with water, to prevent pump damage. Then, turn the power switch:
1.1, start the host button and pump button.
1.2, Open the governor switch.
1.3, Slowly rotating speed controller,
the machine will operate normally.
1.4, Downtime we first governor re-zero,
and then cut off the power.
Machine size:1100×800×1800 mm
5 filling machine:
2.1:check steam source, water is turned on, and
maintain a certain degree of normal pressure.
2.2:Open the power switch, make button to set the
automatic position, filling machine under the control
of the program on the automatic operation.
1.Stable conveying, using synchronous chasing control between the conveying belt and
engine, making bottles in good condition in the conveying: non-falling, non-block, non-jam.
2. Conveying belt is designed by module, component can be interchanged easily, with compact structure, low noise, easy assembling and maintaining, good flexibility to combine the
bottle type according to the different capacity.
3. The design of electrical control is advanced and rational, we can design the control
method , select the electrical control component according to client's layout, to improve
the conveying stability
4. Set the switch according to conveying system layout or customers' reasonable requirement,
for the convenience of operation.
5. Belt lubricating system is equipped
6.Main part all using ANSI304
7. Fringe board is using the U.S. Rexnord technology to produce Automatic Drinking Mineral Water Bottling Bottle Pure Mineral Water Bottling Machine
2.Side panel: 304 stainless steel sheet, thickness is 2mm
3.Power: HANGZHOU JIE Brand 0.75KW
4.Supporting leg: 304 stainless steel
5.Trunking and cover: 304 stainless steel
6.Lubricant water conservation tank: 304 stainless steel
7.Chain plate: Domestic high-quality plastic chain plate,polyoxymethylene (POM)
8.Bearing housing: 304 stainless steel cageAutomatic Drinking Mineral Water Bottling Plant
Automatic Pet Bottle Pure Mineral Water Filling Machine